When it comes to home inspection equipment, few items are as essential as ladders. Needed for most roof inspections, ladders are an important tool. But when ladders come in so many materials, lengths, duties, and varieties, it can be tough to determine which is best for your business.
What’s more, choosing a ladder is about more than convenience. According to the Consumer Product Safety Commission (CPSC), more than 500,000 people seek medical help for ladder-related injuries each year. Additionally, about 300 of those individuals die from their injuries, reports the Centers for Disease Control and Prevention (CDC). Such accidents are why, in 2017, the United States and the American Ladder Institute deemed March National Ladder Safety Month.
What is the best ladder for home inspectors? In this article, we share research, including our survey of more than 1,100 home inspectors, to help you choose the right ladder and stay safe while using it.
Several factors can help determine the most appropriate ladder for you and your job, including:
We explore each of these considerations in more detail below.
Manufacturers primarily produce ladders out of wood, fiberglass, and aluminum. For carrying and transporting ladders across inspection properties, aluminum ladders are a lightweight and convenient option.
In fact, of the more than 1,100 home inspectors we surveyed, about 90 percent of them reported using aluminum ladders. Many of those inspectors cited weight and portability as key factors that influenced their decision.
However, if your roof inspection is beside an electrical wire or other power source, using an aluminum ladder can pose an electrical shock risk. (Learn more about avoiding electrical hazards here.)
It’s important that your ladder isn’t the wrong length for the job. With too short a ladder, you may be tempted to step on the top cap, which may lead you to lose your balance. With too long a ladder, it may extend more than three feet beyond the upper support point, leading the base of the ladder to move or slide out.
The following graphic shows the length of ladders our survey participants preferred.
Note that the maximum working height is about three feet less than the overall length of your ladder. So, if you use a 32-foot ladder, you should expect to safely climb and inspect at no higher than 29 feet.
A ladder’s duty rating indicates your ladder’s maximum weight capacity. In their article “Ladders 101,” the American Ladder Institute lists the five categories of duty ratings:
To calculate the duty rating necessary for you, the American Ladder Institute recommends the following equation:
[Your Weight] + [Weight of Clothing and Protective Equipment] + [Weight of Tools/Supplies You’re Carrying] + [Weight of Tools/Supplies Stored on Ladder]
You can find your ladder’s duty rating on the specifications label on the side of your ladder.
There are many types of ladders, including articulating ladders, combination ladders, and single or extension ladders. Each ladder type has different features and requires different safety measures and care.
Considering weight and portability, more than 67 percent of our survey participants said compactness and/or foldability were some of the most important features in a ladder. Furthermore, many of our survey participants use telescoping ladders. Unlike adjustable or extension ladders, telescoping ladders’ rungs can fully collapse, leaving some of these retracted ladders shorter than three feet.
To learn more about ladder varieties, refer to the American Ladder Institute’s “Ladders 101” article mentioned earlier.
In addition to ladder type, you may want to consider brands. The following illustrates which brands our survey participants favored most.
The right ladder for a roof inspection is always one that’s in good condition. Inspect your ladder regularly to confirm it’s safe to climb. When checking your ladder, here are a few items to examine to make sure they are present and properly functioning:
If your ladder is defective or damaged, don’t use it. Replace it with a fully functioning ladder.
While it’s easy to consider yourself too good at your job to have such an accident, it can happen to anyone. In his article “Ladder Safety” for the ASHI Reporter, Rick Bunzel explained why assuming you’re impervious to falls is naive.
“Most of us believe we’ll never have an accident during an inspection. However, think back over the past months about how many close calls you had. How many times did the ladder jump around while you were going into the attic? Or did the ladder shift when you stepped back onto it?” Bunzel wrote.
Thankfully, falling from your ladder or a roof while on the job is avoidable. There are ways for you to manage your risk against harm. Find some suggestions below.
According to the American Ladder Institute, bad footwear can cause falls. Thus, it’s important to wear the right shoes when climbing ladders and inspecting roofs. Here are some characteristics industry and safety experts recommend looking for in shoes:
There are lots of recommendations for roof inspections and roofing online, most of which point to hiking boots and skating shoes. Many caution against athletic shoes, some of which have little cleats on the soles that can damage shingles. Which shoe is best for you will depend on your budget, your feet, and the weather in your area.
“When you’ve inspected 2,000 roofs, you start taking things for granted,” said KC Bartley of Professional Home Inspections in Tennessee in a previous article. “You just kind of throw your ladder down and jump on the roof.”
Make sure you always set up your ladder on firm, level ground. There shouldn’t be anything that can cause your ladder to slip at the base or top support points.
Also, look out for potential hazards in the surrounding area. If you’re placing your ladder near a door, are you sure that door is locked and not going to be opened while you’re using your ladder? Are there household pets nearby that could potentially run into and knock over your ladder?
When setting up your ladder, always open it completely so all the locks engage. If you’re using an extension ladder, follow the four-to-one rule: For each four feet of distance between the ground and the upper point of contact—in your case, the wall or the roof—move the base of the ladder out one foot.
Some home inspectors like it when clients attend the home inspection. They believe being present helps their clients have appropriate expectations and better understand your inspection findings. However, one area to which clients should never accompany you is the roof.
Do not allow overzealous clients (or agents or anyone else) to climb up the ladder after you. In fact, don’t let them anywhere near your ladder. You may consider putting a sign on or beside your ladder to encourage others to stay back. Failure to create strict boundaries around your ladder and your roof inspection could harm you or others.
If you or one of your home inspectors is injured during a roof inspection, workers’ compensation benefits may be available to you.
Workers’ comp insurance provides employees who suffer from work-related injuries or diseases with access to medical and wage benefits. Unlike general liability (GL) insurance, which covers inspection-related bodily injury and property damage claims for non-employees, workers’ compensation looks out for you and the people who work for your company.
“One accident can not only hurt you and maybe put you out of business, but more importantly, that employee has to have a way of making a living and getting his bills paid for it if it happens on the job,” said Alan Grubb of 4U Home, Inc. in Maryland in a previous article.
By covering job-related injury and illness costs, workers’ comp protects both employees and employers. Employees work under less financial risk knowing they have on-the-job protection. Additionally, employers limit their liability and deter litigation.
“If you have any employees, they need to have workman’s comp,” Grubb said. “The amount that it costs for workman’s comp is minor [compared] to what it could cost you or your employee if you didn’t have it.”
Get a quote for workers’ comp for home inspectors today by completing our application. Or, you can learn more about workers’ comp by reading this long-form article on our blog.
Inspect roofs confidently by choosing the ladder that’s right for your business and taking the necessary precautions to avoid accidents and injuries. Learn more about National Ladder Safety Month and obtain free training, flyers, and videos by visiting laddersafetymonth.com.
The following is a real errors and omissions (E&O) case study from our home inspection…
Home inspector continuing education goes far beyond licensing. A home inspector’s education can impact how…
The following story of clogged sewer drains after the home inspection is a real claim…
Why would a local home inspector want to get involved with their community? Everyone needs…
The following home inspector and missed leaking roof story is a real errors and omissions…
Money is on the minds of people considering a new home inspection career. Whether they’re…
This website uses cookies.